Electrolux EWW 14781 W Instrucciones Para El Uso página 14

14 electrolux use
The drying time is automatically
adjusted by the machine: the laundry
will be dried to the selected dryness
degree.
Select the Drying Time
Temp. Centrifug.
If you wish to carry out a timed drying
programme, press this button until the
drying time you want appears on the
display according to the fabrics (cot-
tons or synthetics) you have to dry.
For Cottons and Synthetics you can
select a drying time from 10 minutes to
2.10
130 minutes (
Every time you press this button the
drying time increases by 5 mins.
Note!
The programme time will automatically
increase by up to 2 minutes, this is
quite normal.
Select the Delay Start (Inicio
diferido)
Before you start the programme, if
you wish to delay the start, press the
Delay Start (Início diferido) button
repeatedly, to select the desired delay.
The corresponding icon
on the display in the upper part of the
display.
Inicio
diferido
).
will appear
The selected delay time value (up to 20
hours) will appear on the display for
about 3 seconds, then the duration of
the programme will appear again.
You must select this option after you
have set the programme and before you
press the Start/Pause (Inicio/Pausa)
button.
If you wish to add laundry in the
machine during the delay time you will
press Start/Pause (Inicio/Pausa) button
to put the machine in pause. Add the
laundry, close the door and press
Start/Pause (Inicio/Pausa) button again.
You can cancel the delay time at any
moment, before you press the
Start/Pause (Inicio/Pausa) button.
The washing programme can be
delayed from 30 min - 60 min - 90 min,
2 hours and then by 1 hour up to a
maximum of 20 hours by means of this
button.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
• Depress Start/Pause (Inicio/Pausa)
button: the machine starts its hourly
countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Depress Start/Pause (Inicio/Pausa)
button.
• Depress Delay Start (Inicio diferido)
button until the symbol
• Depress Start/Pause (Inicio/Pausa)
button again.
The Delay Start cannot be selected
with Drain (Desagüe) programme.
0'
is displayed.