Electrolux EWW 14781 W Instrucciones Para El Uso página 36

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

36 electrolux something not working
Malfunction
The machine does not
empty and/or does not spin:
The door will not open:
No water is visible in the
drum
There is water on the floor:
Possible cause
The drain hose is squashed
E20
or kinked.
The drain filter is clogged.
E20
The option
has been
selected.
The option
has been
selected.
The option
has been
selected.
The laundry is not evenly
distributed in the drum.
The programme is still
running.
The door lock has not been
released.
There is water in the drum.
Machines based on modern
technology operate very
economically using very little
water without affecting
performance.
Too much detergent or
unsuitable detergent
(creates too much foam)
has been used.
Check whether there are
any leaks from one of the
inlet hose fittings. It is not
always easy to see this as
the water runs down the
hose; check to see if it is
damp.
The drain hose is damaged.
The cap on the emergency
emptying hose has not
been replaced after
cleaning the pump.
Solution
Check the drain hose
connection.
Clean the drain filter.
Select the programme
Spin (Centrifugado) or
Drain (Desagüe).
Select the programme
Spin (Centrifugado) or
Drain (Desagüe).
Select the programme
Spin (Centrifugado) or
Drain (Desagüe).
Redistribute the laundry.
Wait the end of washing
cycle.
Wait for some minutes until
the door lock is released.
Select drain or spin
programme to empty out
the water.
Reduce the detergent
quantity or use another one.
Check the water inlet hose
connection.
Change it with a new one.
Put the cap back on the
emergency emptying hose
and place the latter back in
its seat..

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido