Milwaukee M12 HAMMERVAC Manual Del Operador página 3

• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Do not use damaged battery pack or dust extrac-
tor. If battery pack or dust extractor are not working
as they should, have been dropped, damaged, left
outdoors, or dropped into water, return them to a
service center.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES FOR
DUST EXTRACTORS
•Before using the dust extractor, read this opera-
tor's manual, your tool, battery pack and charger
operator's manuals, and all labels on the dust
extractor, battery pack, charger and tool.
• Always use side handle assembly with the correct
neck diameter for the rotary hammer/hammer
drill. An ill-fitting side handle will not tighten securely,
causing loss of control.
• Never use dust extractor without dust box and
HEPA filter in place. Never use water to clean
dust box or HEPA filter.
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• Always use side handle provided with dust
extractor when using with a rotary hammer/
hammer drill. When dust extractor is removed
from the tool, always use side handle(s) supplied
with the tool. Loss of control can cause personal
injury.
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
READ AND
SAVE ALL
INSTRUCTIONS
FOR FUTURE USE
SYMBOLOGY
Volts
Direct Current
UL Listing for Canada and U.S.
US
C
SPECIFICATIONS
Max Bit Diameter .............................................. 5/8"
Cat. No. ..................................................... 2306-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
Max Bit Diameter .............................................. 5/8"
Hammer Collar Sizes
Diameter
S = Ø 43-46 mm (1.7"-1.8") 135-144.5 mm (5.3"-5.7")
M = Ø 48-55 mm (1.9"-2.2") 151-173 mm (6"-6.9")
L = Ø 56-59 mm (2.2"-2.3") 76-185 mm (6.9"-7.2")
Recommended Ambient
Operating Temperature ......................0°F to 125°F
FUNCTIONAL DESCRIPTION
2
6
3
1
4
5
12
1. Dust Box Latch
2. Power Switch
3. Fuel Gauge
4. Dust Box with Filter
5. Side Handle Clamp Attachment Point
6. Tool and Bit Adjustment Button
7. Depth Gauge
8. Depth Gauge Button
9. Nozzle
10. Nozzle Assembly
11. Bit Brush
12. Side Handle Clamping Collar Assembly
13. Clamp Lever
14. Side Handle Grip
3
Circumference
7
9
8
11
13
10
14