GE 26 Serie Manual Del Propietário página 30

INSTALLING THE REFRIGERATOR
REMOVE THE FREEZER DOOR
7
Use the tip of a screwdriver to separate the rail from
E
the rail cover. Tilt the front end up and lift the entire
door.
F
Set the door front on a nonscratching surface.
G
Push the rail assemblies back into the cabinet.
CAUTION:
assemblies back at the same time.
REMOVING THE LEVELING LEGS
8
(if applicable)
26-cu.-ft. models
Remove the 2 bolts securing the leveling leg bracket to
the front of the refrigerator cabinet. Do this on both
sides.
Installation Instructions
(cont.)
Push both sides of the rail
(cont.)
REMOVING THE LEVELING LEGS
8
(if applicable) (cont.)
29-cu.-ft. models
Two people are required to complete this procedure.
Gently lean the refrigerator back so the front end is off
A
of the floor.
Remove the 2 bolts securing the leveling leg bracket to
B
the underside of the refrigerator cabinet. Do this on
both sides.
REPLACING THE LEVELING LEGS
9
(if applicable)
26-cu.-ft. models
Replace the 2 bolts to secure the leveling leg bracket to
the front of the refrigerator cabinet. Do this on both
sides.
30