Power Head; Foot Pedal - Windsor FLEXAMATIC FM12 Instrucciones De Funcionamiento

! CAUTION
The brush roller is off and stopped when the
machine is in the upright position and the handle is
completely locked in place.
NOTE: If you have the machine handle at an
angle, the brush roller will spin.
Leaving the machine in a stationary position for an
extended period of time while the brush roller is
spinning may cause damage to your carpet.
Recommended items to be aware of with regard to
your Flexamatic.
•
Be sure NOT to allow carpet edges or
fringe into the brush.
•
This machine could cause damage to
loosely woven carpets or rugs, wool loop
carpets, long piled carpets, or very soft
and sensitive floor coverings.
•
We do NOT recommend using the power
head to clean old or specially valuable
hand-crafted carpets.
•
If you have uneven flooring, the metal part
underneath the machine may scratch the
surfaces.
•
Please carry the machine over high
thresholds.
Important instructions for
use on the power head.

POWER HEAD

The rotating design of the swivel neck allows the
power head to move in any direction, making it
easily maneuverable around obstacles.
The power head also has an adjustable brush
height and to-the-edge brush action for effective
all around cleaning.

FOOT PEDAL

By pushing the foot pedal and lowering the
handle, you activate the power head and the
brush begins spinning.
! WARNING
Failure to use the Foot Pedal will cause damage
to the unit.
86041040 08/28/07
OPERATION
3-4