II. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
allows you to follow the measurement in seconds.
2. t o interrupt the measurement, press pushpiece A
once more. t o restart the time measurement, press
pushpiece A. t his procedure makes it possible to
add several short times.
3. t he chronograph is reset to zero by pressing push-
piece B, once the final measurement has been stopped.
4
4
Chronometre
Navitimer
2
16
SPECIAL CHARACTERISTICS
SECOND TIMEZONE
t he second, independent hour hand (A) makes a com-
plete sweep of the dial in 24 hours. Its position relati-
ve to the 24-hour markings inscribed on the dial rim
can serve as a second timezone indication. t he hand is
reset by pulling the crown out of position 2 and rotat -
ing it counterclockwise.
17