Description Of Function - Toyota TPA400 Manual Del Propietário

A. Description of function
The vehicle is equipped with a system that facilitates reverse parking manoeuvres by
detecting obstacles that could damage the vehicle. When reverse gear is engaged, an
audible beep signals that the Toyota Parking Aid is active. The detected obstacle will be
indicated by an intermittent beep, increasing in frequency until it becomes a continuous
tone as the vehicle moves closer to the obstacle.
CAUTION
The detection zone is always taken from the rear end of the bumper, regardless a
towing hitch or spare wheel cover is installed. If applicable, please take the size of
the spare wheel cover and towing hitch into account.
=
Continuous signalling zone: this is the zone nearest to the rear bumper. The Toyota Parking
Aid detects obstacles and emits a continuous beep, whether or not the vehicle is at a
standstill.
=
Beep
Static zone: this is the intermediate zone. The Toyota Parking Aid detects obstacles and
emits an intermittent beep, whether or not the vehicle is at a standstill.
=
Beep
Dynamic zone: this is the most distant zone and also the widest. The Toyota Parking Aid
detects obstacles, but only emits an intermittent beep if the distance between the vehicle
and the obstacle is diminishing.
No detection: in case the system is not able to detect obstacles due to sensor
malfunctioning, the system will generate a continuous intermittent tone with long beeps and
short pauzes.
±30 cm ±120 cm ±200 cm
Beeeeee......p
Beep
CAUTION
The distances mentioned are
only a guide, the shape of each
detection zone can vary from
vehicle to vehicle.
INFORMATION
Please contact your dealer for
more details about the detection
zone of your vehicle.
Beep
ENG
Toyota Parking Aid 3