GE 898694 Manual Del Usuario página 10

Anti-drip function
• This feature is designed to prevent water from dripping from the soleplate (16)
when the iron is not heated enough. During use, the iron may emit a clicking sound,
particularly while heating up or cooling down. This is normal and indicates the iron
is functioning normally.
Auto shut-off function
• If the iron is not moved for a certain period of time, it will shut off automatically.
• After shut off, the iron stops heating up and the operation indicator (12) will flash.
• Tilt the iron back and forth to resume the work with the last temperature setting.
Turning iron off (O) and emptying water tank
• After use, set the temperature control (13) to off (o).
• Slide the function control (4) to dry ironing
Disconnect the iron from the electrical outlet and let it cool on its heel (11) (ill. e ).
•
• Open the fill inlet cover (2) and hold the iron upside down over a sink to empty the
water tank (15) (ill. k ).
• hold the power plug (8) with one hand, and press and hold the cord retraction
button (10) with the other hand to retract the power cord (8) (ill. l ).
CAuTion! burn hazard: During the cooling process, do not touch the soleplate (16) to
check the temperature (ill. f ).
898694-Iron-EN+ES-01.indb 10
OPERATION (CONT.)
Position illustration
On soleplate
On the side
On the heel
Time
30 seconds
30 seconds
15 minutes
position (ill. d ).
10
3/6/12 4:58 PM