Troubleshooting - GE 898694 Manual Del Usuario

Plancha con cable retráctil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ProblEM
Iron does not
heat up.
Water leaks out
of the iron.
Iron does not
produce steam.
898694-Iron-EN+ES-01.indb 12

TROUBLEShOOTING

CAusE
The power plug (8) is not
connected properly to
the electrical outlet or the
circuit breaker is tripped.
The temperature setting is
set to off (o).
The auto shut-off function
has been activated.
The water tank (15) is
overfilled.
The set temperature has
not been reached or is too
low.
Water level in the water
tank (15) is too low.
The set temperature has
not been reached.
The function control (4)
is not set to the steam
ironing
position.
Anti-drip function shuts
off steam when the
temperature setting is too
low.
soluTion
Re-connect the power
plug (8) properly to the
outlet or check the circuit
breaker.
Set the temperature
control (13) to desired
temperature.
Tilt the iron back and forth
to restart the iron.
Pour out some water.
Allow sufficient time for
the iron to preheat or set
higher temperature.
Add water in the water
tank (15).
Allow sufficient time for
the iron to heat up.
Set the function control (4)
to the steam ironing
position.
Set temperature higher.
12
3/6/12 4:58 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido