Using The Blower; Before Operation; Holding And Controlling The Blower - Stihl BGA 57 Manual De Instrucciones

Ocultar thumbs Ver también para BGA 57:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
5.6

Using the Blower

5.6.1

Before Operation

WARNING
■ Misuse or unauthorized use may result in personal injury
and property damage.
– Use the blower only as described in this instruction
manual.
■ Using a blower that is modified, damaged, improperly
adjusted or maintained, or not completely and securely
assembled can lead to a malfunction and increase the risk
of serious personal injury.
– Never operate a blower that is modified, damaged,
improperly maintained or not completely and
securely assembled.
– Always check your blower for proper condition and
operation before starting work, particularly the
retaining latch, trigger switch lockout and trigger
switch.
– Ensure that the retaining latch, trigger switch lockout
and trigger switch move freely and always spring
back to the stop position when released. The trigger
switch must not engage until the retaining latch is
unlocked and the trigger switch lockout is
depressed.
– Never attempt to modify or override the controls or
safety devices in any way.
– If your blower or any part is damaged or does not
function properly, take it to your authorized STIHL
servicing dealer. Do not use the blower until the
problem has been corrected.
■ Before inserting the battery:
– Check the electrical contacts in the battery
compartment for corrosion or other foreign matter
and keep clean.
– Never insert or use a malfunctioning, damaged,
cracked, leaking or deformed battery.
– Read and follow the instructions on switching on the
blower, @ 15.1.
8
5 IMPORTANT SAFETY INSTRUCTIONS
■ To help reduce the risk of serious personal injury from
unintentional starting:
– Be sure the retaining latch is in the locked position
and the trigger switch is in the off position before
inserting the battery.
– Never carry the blower with your finger on the trigger
switch.
– Release the trigger switch before removing the
battery.
– Remove the battery before assembling,
transporting, adjusting, inspecting,
cleaning, servicing, maintaining or
storing the blower and any other time it is
not in use.
– Never leave the blower unattended when the battery
is inserted.
– Never store the battery in the blower.
5.6.2

Holding and Controlling the Blower

0458-807-8621-A

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido