Using The Blower; Working Techniques - Stihl BG-KM Manual De Instrucciones

!
Warning!
Always stop the engine and make sure
that the fan is stopped before doing any
maintenance or repair work or cleaning
the power tool. Do not attempt any
maintenance or repair work not
described in your KombiEngine and
KombiTool instruction manuals. Have
such work performed by your STIHL
servicing dealer only.
Tighten all nuts, bolts and screws except
the carburetor adjustment screws after
each use.
Store the power tool in a dry and high or
locked location out of reach of children.
BG-KM

Using the Blower

Always hold the unit firmly with both
hands on the handles.
Put your right hand on the control
handle, left hand on the assist handle.
Left-handers should follow these
instructions too. Wrap your fingers and
thumbs tightly around the handles.
The blower's high air flow rate enables
you to cover a large area.
The blower is designed for clearing
leaves, grass, paper and light snow in
yards, gardens, sports stadiums,
parking lots or driveways. It is also
suitable for blow-sweeping forest paths.
To reduce the risk of injury, do not
operate the machine unless it is fully
assembled with a properly mounted
blower tube.
Watch out for small animals when
using the blower on open ground, in
yards and gardens.
English / USA

Working Techniques

To minimize blow-sweeping time, use a
rake and broom to loosen the debris.
Recommended working technique to
minimize air pollution:
: If work area is dusty, moisten the
surfaces with water.
: Do not blow debris in direction of
bystanders, especially children,
pets, open windows or vehicles.
Carefully blow debris in the opposite
direction.
: After debris has been blow-swept to
a central point, remove it in trash
cans. Do not blow onto neighboring
land.
9