Principal Parts - Brother XL5100 Manual De Instrucciones

4
3
5
B
D
E
F
H
1
6 2
1
A
9
8
7
0
C
G

PRINCIPAL PARTS

1 Bobbin winding assembly
Winds the thread onto the bobbin to be used for the lower thread.
2 Spool pin
Holds the spool of thread.
3 Bobbin winding tension disc and thread guide
4 Thread take-up lever
5 Thread cutter
6 Upper tension control dial
Controls the tension of the upper thread.
7 Stitch width dial
Controls the stitch width.
8 Pattern selection dial
Turn in either direction to select the desired stitch.
9 Stitch length dial
Controls the length of the stitches.
0 Reverse sewing lever
Push for stitching in the reverse direction.
A Buttonhole fine-adjustment screw
B Buttonhole lever (XL5300, XL5200, PX300 and PX200 only)
C Handle
D Balance wheel
Turn toward you (counterclockwise) to raise and lower the needle.
E Main power/sewing light switch
Turns the main power and sewing light on and off.
F Foot controller receptacle
Insert the foot controller plug for operation.
G Presser foot lever
Raises and lowers the presser foot.
H Foot controller
Used to control sewing speed start and stop.