Digital Tachometer - Yamaha 50G Manual Del Propietário

q
TACH TACH
x100 x100
r/min r/min
r
TACH TACH
x100 x100
r/min r/min
TACH TACH
x100 x100
r/min r/min
TACH TACH
x100 x100
r/min r/min
EMU00135

DIGITAL TACHOMETER

This meter contains the tachometer, trim
w
meter, oil level indicator and overheat
5 5
4 4
warning indicator.
3 3
2 2
1 1
1 Tachometer
2 Trim meter
e
3 Oil level indicator
4 Overheat warning indicator
802011
NOTE:
After the main switch is first turned on all
segments of the display come on as a
5 5
check. The tachometer and trim meter will
4 4
indicate the maximum reading and the
3 3
oil-level indicator and overheat warning
2 2 indicator will light. After a few seconds,
the meters will change to normal opera-
1 1
tion. Watch the meter when turning on
802012
the main switch to make sure all seg-
ments come on.
EMU00136
Tachometer
5 5
This meter shows the engine speed.
4 4
3 3
2 2
1 1
EMU01109
Trim Meter
802042
This meter shows the trim angle of your
outboard motor.
NOTE:
8 Memorize the trim angles that work
5 5
4 4
3 3
2 2
8 If the trim angle of your motor exceeds
1 1
802015
2-10
best for your boat under different condi-
tions. Adjust the trim angle to the
desired setting by operating the power
trim and tilt switch.
the trim operating range, the top seg-
ment on the trim meter display will start
to blink.
GB