Safety - Tecno-gaz Ekstraplus PT001TTM Instrucciones De Uso

2
The unit must only be used to perform maintenance on instruments whose
manufacturer declares them to be compatible with an automatic maintenance
system and from a general aspect, solely for the uses intended by the manufacturer
of the EKSTRA PLUS device.
The device must not be used in potentially explosive atmospheres.
Place the device away from sources of heat or electromagnetic radiation.
Place the unit with the control panel and the screen clearly visible by the operator.
The electrical system must comply with regulations in force. Verify that the system is
adequate for the characteristics of the device.
Check the integrity of the power cord.
In accordance with the regulations in force, the manufacturer is responsible for the product
placed on the market. Responsibility ceases the moment when operations are performed
on the device by unqualified personnel or with non-original spare parts.
DO NOT OPEN THE DEVICE.
Disconnect the power cord in the event of a fault or risk of liquid penetrating the device
and/or when maintenance and cleaning operations must be performed on the device.
Disconnect the power cord from the socket before performing any operation.
Follow the instructions on the safety data sheet of the liquid used.

Wear suitable PPE.

Do not remove the label.

SAFETY

ENGLISH
3