S&P CAB ECOWATT PLUS Manual De Instrucciones página 47

MOTOR TYPE
< EC OK
OK OK
SENSOR
< INTERNAL OK
OK OK
RANGE
< 400Pa OK
OK OK
SET POINT
CONSOLE
< INTERNAL OK
OK OK
No modify
SENSOR
<IN1 0-10V OK
SENSOR
<IN2 0-10V OK
Sensor: Sensor type
- INTERNAL: Pressure differential internal sensor
- IN1 0-10V: External sensor with analog signal 0-10V (J5 terminal)
- IN1 4-20mA: External sensor with analog signal 4-20mA (J5 terminal)
- IN2 0-10V: External sensor with analog signal 0-10V (J6 terminal)
- IN2 4-20mA: External sensor with analog signal 4-20mA (J6 terminal)
Pulsar o para modificar manualmente el
parámetro. El valor que aparece en pantalla corresponde
a la escala del sensor interno preajustado en fábrica. Si se
instala un sensor externo, introducir el rango de escala
correspondiente.
SET POINT
<INTERNAL
<CONSOLE OK
SET POINT
<IN1 4-20mA OK
SET POINT
<IN2 4-20mA OK
Set Point:
- INTERNAL
- CONSOLE: Value set by PROSYS ECOWATT console. Factory set value
- IN1/IN2 0-10V: Value set by external potentiometer (0-10V)
- IN1/IN2 4-20mA: Value set by external potentiometer (4-20mA)
SENSOR
<IN1 4-20mA OK
SENSOR
<IN2 4-20mA OK
SET POINT
<IN1 0-10V OK
SET POINT
<IN2 0-10V OK
47