S&P CAB ECOWATT PLUS Manual De Instrucciones página 51

SET POINT
CONSOLE
< INTERNAL OK
OK OK
PARAMETERS
< Kq=133 OK
OK OK
PARAMETERS
< Kp=100 OK
OK OK
PARAMETERS
< Ki=20 OK
OK OK
SENSOR IN1
<SIN SENSOR OK
OK OK
SET POINT
<INTERNAL <CONSOLE OK
SET POINT
<IN1 4-20mA OK
SET POINT
<IN2 4-20mA OK
Set Point:
- INTERNAL
- CONSOLE: Value set by PROSYS ECOWATT console. Factory set value
- IN1/IN2 0-10V: Value set by external potentiometer (0-10V)
- IN1/IN2 4-20mA: Value set by external potentiometer (4-20mA)
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
SET POINT
<IN1 0-10V OK
SET POINT
<IN2 0-10V OK
51