Tabla de contenido
Publicidad
➢ ➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum.
➢ ➢ During this time the headlight remains on.
➢ ➢ To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace
filters.
➢ ➢ Replace full bag if necessary.
➢ ➢ Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal
protector has reset. Thermal protector will not reset if vacuum is not turned off even
if vacuum cools down.
Motor Protector
(Behind Tube)
Protecteur du
moteur
(derrière le tube)
Protector de motor
(Detrás del tubu)
Thermal Protector
Motor Protector
➢ ➢ Motor protector automatically opens
to provide cooling air when a clog
occurs or when bag needs changing.
➢ ➢ Motor protector may open when
using tools.
➢ ➢ If motor protector opens, the vacuum
will make a slightly different sound.
Note: Do not block motor protector.
- 18 -
Publicidad
Tabla de contenido
