Maintenance And Storage - Hudora 65136 Instrucciones De Montaje

• Caution: Under no circumstances should high-jumping exercises, somersaults or other
acrobatic feats be performed on the trampoline. Never jump off the trampoline onto
the ground!
• Prior to any use of the folding trampoline, check the correct attachment of the safety
padding (6).
• Never place the trampoline on a concrete floor. Place mattresses and blankets around
the trampoline, in order to cushion a possible fall, in case the floor is too hard.
• Ensure a free space of 2 m around the trampoline's diameter.
• The height of the clearance above the jumping mat has to at least amount to 5 m.
• The trampoline shall constantly be monitored for its suitability for use, for example,
with regard to the permissible wear and tear of the wearing parts.
• Wearing parts are:
- Spannings and their fixations
- The fastening of the covering on the device
- Anti-skid protection
- Jumping mat
INSTALLATION INSTRUCTIONS AND INFORMATION
1. Keep children away from the folding trampoline during the installation process.
2. Do not touch the ends of the frame components with your fingers while unfolding the
folding trampoline. The folding trampoline will lock into the unfolded position. If fingers
are caught between the ends of the frame components, pinching may cause serious
injuries.
3. If you let go prior to the frame components having locked into place the frame
components will go back into the folded up position while you are unfolding the folding
trampoline.
4. The folding trampoline should always be unfolded or folded by two or more strong
individuals.
Prior to installation, cross check all springs. These have been pre-installed by the factory.
If one of the springs is not attached or appears to be damaged, please perform the steps
to secure the spring or exchange it as shown in figure B:
A. Hook the open end of the spring (14) into the hole on the panel.
B. Turn the spring (14) in the direction of the trampoline.
C. Slide the metal bow on the mat (5) over the spring hooks.
Prior to the performing the installation, make sure that the safety bolts (10) have been
inserted into the frame components correctly. The two overhangs must be installed within
the frame components, as shown in the cross sectional drawing in the Figure. Failure to
do so can cause damage to the safety bolts (10) during installation step 3.
STEP 1
Place the trampoline on the ground and open the frame components. The trampoline
should look exactly as shown in Figure 1.
Make sure that the safety bolts (10) have been inserted into the ends of the panels (1, 2)
and secure the wire ring. Both ends of the safety bolts (10) should be placed at intervals
of approx. 30 cm between the frame components (1 + 2 and 3 + 4) and the wire ring.
See Figure 2.
STEP 2
Hold the frame components (3, 4) while pressing down the frame components (1, 2) to
unfold the trampoline in a flat position. Frame components (1, 4) and rails (2, 3) should
lock into place and be secured by the safety bolts (10) once you have reached the flat
position. See Figure 2.
WARNING
Do not allow your fingers to touch the end of the panels in the hingejoint areas while you
are folding or unfolding the trampoline. If your fingers get caught between the ends of the
panels, pinching can cause serious injuries!
STEP 3
Push the safety padding (6) over the panel frame. Make sure that the holes in the safety
padding (6) are perfectly alinged with the screw connections of the stands. See Figure 3.
NOTE: Place the opening over the screw connector and repeat this step fort he screw
connection on the opposite end of the trampoline.
STEP 4
Screw the six legs (7) into the screw connectors on the panel frame. See Figure 4. The
safety padding (6) must be securely connected with the frame before the trampoline may
be used. The trampoline must be placed firmly on the ground as shown in Figure 5.
STEP 5
Place the trampoline into its normal position suitable for its used. Make sure that the
safety padding (6) covers the springs of the folding trampoline. Stand on the trampoline to
make sure that all six legs are placed straight on the ground. See Figure 5.
DISMANTLING/FOLDING OF THE TRAMPOLINE
STEP 6
Unscrew the legs (7) from the threaded supports of the frame (see figure 6).
STEP 7
You should remove the safety cushion, prior to folding up the trampoline. Place the
trampoline with the top down on a hard-wearing floor. Position yourself on the frame of
the trampoline in such a way that your left foot is in the middle of frame section 4 and
right foot is in the middle of frame section 3. Loosen the safety bolts from the trampoline
frame. Hold frame section 1 with your left hand and frame section 2 with the right one,
and now pull in the two frame sections towards yourself (see figure 7).
STEP 8
Fold the trampoline in the middle (see figure 8).
STEP 9
Now fold the entire trampoline as shown in figure 9.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do
not make any structural changes. For your own safety, please use original spare parts
only. These can be sourced from HUDORA. If parts become damaged or if sharp edges
or corners should develop, the product may not be used any more. If in any doubt, please
contact our service team (http://www.hudora.de/). Store the product in a safe place
where it is protected from the elements, cannot be damaged, and cannot injure anyone.
Store the trampoline in a dark area and protect it from dust and sharp objects. Clean the
cloth material with a brush. All other parts may be cleaned with a damp cloth. Use the
protective covers to protect windings from corrosion whenever the legs are not installed.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point
provided in your area. Local waste management companies will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can find numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de.
6/12