Compressor Protection - Honeywell RTH6350 Serie El Manual Del Propietario

Smart Response
Smart Response® Technology: This feature allows the thermostat to
"learn" how long the furnace and air conditioner take to reach programmed
temperature settings, so the temperature is reached at the time you set. For
example: Set the Wake time to 6 am, and the temperature to 70°. The heat will
come on before 6 am, so the temperature is 70° by the time you wake at 6.
The message "In Recovery" is displayed when the system is activated before a
scheduled time period.
Inside
75
In Recovery
6 : 38
Fan
Set Clock/Day/
Auto
Schedule
Built-in compressor protection
This feature helps prevent damage to
the compressor in your air conditioning
or heat pump system.
Damage can occur if the compressor is
restarted too soon after shutdown. This
feature forces the compressor to wait a
few minutes before restarting.
During the wait time, the display will
flash the message Cool On (or Heat
On if you have a heat pump). When
the safe wait time has elapsed, the
message stops flashing and the
compressor turns on.
Technology
®
Cool
Setting
75
AM
Cool On
System
Cool
M27476
17
Displays when Smart Response is active.
Inside
75
6 : 30
Fan
Set Clock/Day/
Auto
Schedule
Cool
Setting
75
AM
Cool On
System
Cool
M28412