Troubleshooting Guide (Continued)
SYMPTOM
Oil in the discharge air
CAUSE
1. Worn piston rings
2. Compressor air intake
restricted
3. Restricted breather
4. Excessive oil in
compressor
5. Wrong oil viscosity
6. Connecting rod out of
alignment
SOLUTION
1. Replace with new rings.
2. Clean filter. Check for other restrictions in the intake system.
3. Clean and check breather for free operation.
4. Drain down to full level.
5. Use SAE 30 (ISO 100) non-detergent compressor oil.
6. Replace rod.
Series CE2000
www.chpower.com
11