Resetting The Scale; Cleaning; Fault/Remedy - ADE KE 1800-1 Instrucciones De Operación

Resetting the scale

Reset the scale to factory settings if unusual or obviously incorrect values are shown on
the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Re-insert the batteries.
Pay attention to the correct polarity of the batteries (+/-). The plus pole (+) must
point upwards.
After switching the scale on, you can start weighing as usual.

Cleaning

NOTE on material damage
− Do not immerse the scale in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scale. If you do, the surface
could be scratched.
The scale should be cleaned immediately after use, especially if they have come into
contact with fat or oil, spices, vinegar, and other strongly spiced and/or coloured
foodstuffs.
− Wipe down the scale as needed using a lightly dampened, soft cloth. Avoid
contact with citric acid.

Fault/Remedy

Fault
No function
The scale appear to be displaying
false weighing results.
"EEEE" is shown on the display.
"Lo" is shown on the display.
Kitchen scale KE 1800-1 | 1800-2 | 1800-3 | 1800-4
Possible Cause
‚ Battery empty or inserted the wrong way
around?
‚ Is the scale standing on a firm, even
surface?
‚ Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scale?
‚ Remove the battery from the scale and wait
a moment. Reinsert the battery.
‚ The maximum capacity of the scale (5 kg)
has been exceeded.
‚ The battery is empty (see "Inserting/
changing the battery").
Resetting the scale
19