Publicidad
Enlaces rápidos
U P
®
C
®
ASME A112.18.1 / CSA B125.1
ICC/ANSI A117.1
Models/Modelos/Modèles
6592 & 6597
Series/Series/Seria
RSVP™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
Note: A small packet of silicone grease has been included with your faucet. You may use it to lubricate O-rings when necessary.
Nota: Con su llave de agua se incluye un sobrecito de grasa de silicón. Cuando sea necesario, puede utilizarlo para lubricar los aros-O.
Note : Un petit contenant de graisse à la silicone est inclus avec votre robinet. Vous pouvez l'utiliser pour lubrifier les joints toriques au besoin.
For easy installation of your
Brizo
®
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
®
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet
Brizo
facilement, vous devez:
®
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
TWO HANDLE WALL MOUNTED LAVATORY FAUCETS
LLAVES DE AGUA - GRIFOS - DE DOS MANIJAS PARA
INSTALACIÓN EN LA PARED
ROBINETS MURAUX À DEUX MANETTES POUR LAVABO
6592
Note: Drain sold separately. / Nota: El desagüe se vende aparte. / Note : Le renvoi est
vendu séparément.
3 mm
1
6597
L
11/11/08
Rev. C
12076.00
Publicidad
Manuales relacionados para Brizo RSVP 6592
Resumen de contenidos para Brizo RSVP 6592
- Página 1 Nota: Con su llave de agua se incluye un sobrecito de grasa de silicón. Cuando sea necesario, puede utilizarlo para lubricar los aros-O. Note : Un petit contenant de graisse à la silicone est inclus avec votre robinet. Vous pouvez l’utiliser pour lubrifier les joints toriques au besoin. For easy installation of your Brizo ® faucet you will need: •...
-
Página 2: Cleaning And Care
This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty. - Página 3 Modelos / Modèles 6592 & 6597 Models / RP36266 Valve Cartridge, Hot Side Cartucho de la Válvula , Lado Caliente Cartouche de soupape, eau chaude RP48435 Screw & Stem Tornillo y Espiga Vis et tige RP48413 Gasket RP48413 Empaque RP48432▲ Gasket Joint Lever Handle, Body &...
- Página 4 MAINTENANCE – VALVES MAINTENANCE – SPOUT SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE OR SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE OR SPOUT ASSEMBLIES SPOUT ASSEMBLIES If your faucet leaks out of spout or around handle body, replace valve cartridge (1). If your faucet leaks at the back of the spout, replace two o-rings (1) on spout adapter (2).
- Página 5 Min. 11 1/2" Min. 11 1/2 po 2 1/8" - 3 1/2" Min. 3" 2 1/8 po - 3 1/2 po Min. 3 po MAKE CONNECTIONS TO WATER LINES FAUCET INSTALLATION NOTE: It is very important that the spout tip of this faucet be at least 1" minimum Install 1⁄2"...
- Página 6 4" (100 mm) 1 1/2" (38 mm) Diameter COMPLETE WALL FINISH MOUNTING SPOUT ADAPTER Complete finish wall with 1 1⁄2" diameter holes for handle and spout Remove plaster guard (1) and foam spacer (2) from threaded center shanks. Space hole centers 4" (100 mm) apart. NOTE: To ensure proper stud on valve body.
- Página 7 3 mm MOUNTING HANDLES AND SPOUT NOTE: If handles do not align to your satisfaction, unscrew one or both handles and body assemblies until handle disengages from stem. Rotate handle one Remove plaster guard (1) and foam spacers (2) from threaded studs on hot spline up or down and screw assembly onto threaded stud until it contacts wall and cold valves.
- Página 8 FLUSH YOUR SYSTEM Remove aerator (1) using blue plastic key (2) provided with your faucet. NOTE: You may need to turn on cold water slightly to help push out aerator. Turn both faucet handles (3) to full open position. Turn on hot and cold supplies (if not already open) and flush water lines for one minute.