10. REV E / FWD D (p. 39)
Press to begin slow forward or slow reverse
playback during the pause mode (DVD) and
search forward or backward through a disc.
11. PLAY B (p. 38)
Press to begin disc playback.
12. SKIP H / G (p. 40)
Press to skip forward or backward chapters, titles
(DVD) or tracks (CD).
13. PREV CH (p. 18)
Press to return to the previous channel.
+ / -
14. VOL
(p. 18)
Press to adjust the volume.
15. Number buttons (p. 18)
• Press to select channels.
• Press to select chapter, title (DVD), or track (CD)
directly.
• (dot)
• Press to shift the subchannel from the main
channel.
+10 button
• Press to select 10 or higher number of chapters.
16. FREEZE (p. 19)
TV mode
• Press to pause screen image.
17. EJECT A (p. 38)
Press to eject the disc.
18. DISC MENU (p. 38)
Press to display the menu on a disc.
19. TITLE (p. 38)
Press to display the title menu (DVD).
Installing the Batteries
Install the batteries (AAA x 2) matching the polarity indicated inside battery compartment of the remote control.
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
20. FORMAT (p. 21)
Press to select aspect ratio available for
the TV screen.
21. INFO (p. 20 / p. 43)
Digital mode (DTV)
• Press to display the channel information,
signal type and TV setting.
Analog mode (TV)
• Press to display the channel number,
signal type and TV setting.
External input mode
• Press to display the external input modes,
signal type and TV setting.
DVD mode
• Press to display the current status.
22. PAUSE F (p. 38)
DVD mode
• Press to pause disc playback.
23. STOP C (p. 38)
Press to stop disc playback.
24. MUTE (p. 18)
Press to turn the sound on and off.
+ / -
25. CH
(p. 18 / p. 19)
Press to select channels and the
external input modes.
26. CLEAR (p. 41)
• Press to clear the numbers entered incorrectly.
• Press to cancel the point A for A-B repeat.
• Press to remove the track number in program
input (CD).
11
EN