Instructions For Assembly; List Of Spare Parts - Kettler RACER 9 Instrucciones De Montaje

Ocultar thumbs Ver también para RACER 9:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
this, children are allowed to use the equipment, ensure that
they are instructed in its proper use and supervised accor-
dingly.
Before beginning your first training session, familiarize yours-
elf thoroughly with all the functions and settings of the unit.
A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse pe-
dalling result from engineering and are absolutely safe.
The training device has a electromagnetic brake system.
The equipment is independent of revolutions per minute.
Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.

Instructions for Assembly

!
RISK!
Ensure that your working area is free of possible sour-
ces of danger, for example don't leave any tools lying aro-
und. Always dispose packaging material in such a way that
it may not cause any danger. There is always a risk of suffo-
cation if children play with plastic bags!
Ensure that you have received all the parts required (see
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings careful-
ly and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
List of spare parts page 40-42
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art.no. 07988-725 / spare-part no. 11701051
/ 1 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
Always wear suitable shoes when using.
Use for your regular cleaning, maintenance and care our ap-
pliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.
For a comfortable training position please adjust the hand-
lebar andsaddle position to your body height.
Nobody may be in the moving range of a training person du-
ring training.
Calibration of the device can only be carried out by the ma-
nufacturer. Note: a calibration diagram is included.
Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed.
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be re-
placed.
For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 591901
+44 1527 62423
e-mail:
sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
e-mail:
sales@kettler.co.uk
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

07988-725

Tabla de contenido