voestalpine Bohler URANOS 2700 MTE Instrucciones De Uso página 42

1 Heading
Allows the display of certain pieces of important infor-
mation relating to the selected process:
- The synergic curve selected
1a Type of filler metal
1b Wire diameter
1c Type of gas
- Welding parameters
1d Welding current
1e Part thickness
1f Corner bead
1g Welding voltage
2 Welding parameters
2a Welding parameters
Select the required parameter by pressing the encoder
button.
Adjust the value of the selected parameter by rotating
the encoder.
2b Parameter icon
2c Parameter value
2d Unit of measurement of the parameter
42
3 Functions
Allow the setting of the most important process func-
tions and welding methods.
3a
Allows the selection of the welding process
MMA
TIG DC
Standard MIG/MAG
Pulsed MIG/MAG
3b
TIG DC
Allows the selection of the welding method
2 Step
4 Step
Bilevel
MIG/MAG - Pulsed MIG/MAG
Allows the selection of the welding method
2 Step
4 Step
Crater filler
3c
MMA Synergy
Allows you to set the best arc dynamics,
selecting the type of electrode used:
STD
CLS
CrNi
Alu
Cast iron Cast iron
Selecting the correct arc dynamics enables maximum
benefit to be derived from the power source to achieve
the best possible welding performances.
Perfect weldability of the electrode used is not guaran-
teed (weldability depends on the quality of the consum-
ables and their preservation, the operating and welding
conditions, the numerous possible applications, etc.).
TIG DC Current pulsation
CONSTANT current
PULSED current
Fast Pulse
Basic/Rutile
Cellulose
Steel
Aluminium