Leak Testing - Broil King Porta-Chef 320 Manual Del Usuario

Ocultar thumbs Ver también para Porta-Chef 320:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LEAK TESTING

All factory-made connections have been rigorously tested
for gas leaks. However, shipping and handling may have
loosened a gas fitting.
AS A SAFETY PRECAUTION:
• Test all fittings for leaks before using your gas grill.
• Test the cylinder valve for leaks each time the
cylinder is filled.
• Test for leaks every time you connect a gas fitting.
• Do not smoke at any time while testing.
• Never test for leaks with a lit match or open flame.
• Test for leaks outdoors.
TO TEST FOR LEAKS:
1. Extinguish any open flame or cigarettes in the area.
2. Be sure that cylinder valve and gas grill valves are
"OFF."
3. Connect LP gas cylinder. See "Hose and Regulator."
4. Prepare a soap solution of one part water, one part
liquid detergent.
5. With a full gas cylinder, open cylinder slowly.
6. Brush the soap solution on each connection.
7. A leak is identified by a flow of bubbles from the area of
the leak.
8. If a leak is detected, close the gas cylinder "shut-off"
valve, tighten the connection and retest.
9. If the leak persists, contact your gas grill dealer for
assistance. Do not attempt to operate appliance if a
leak is present.
PORTA-CHEF 320
PORTA-CHEF 120
PORTA-CHEF 100
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Porta-chef 120Porta-chef 100

Tabla de contenido