BEFORE FIRST USE
When you use your appliance for the first time, pour fresh water
•
into the water tank (without coffee), press the BREW button and
switch on the appliance.
Once all the water has passed through, switch off the appliance
•
and let it cool down. When it is cold enough repeat the process 3
times with fresh water.
HOW TO MAKE COFFEE?
Open the lid of the water tank and fill the water tank with cold
•
water. Close the lid.
Pull the filter holder out using its handle, fill the permanent filter
•
with the desired quantity of ground coffee or use the grinder (see
"USING THE COFFEE GRINDER" section). Then replace the filter
holder in its initial position.
Make sure the jug is placed correctly on the base.
•
To switch on your appliance, press once the 0/1 switch at the
•
back of the appliance.
When you remove the jug from the appliance, a non-drip valve
•
will automatically operate to stop any drops of coffee dripping
onto the base. Replacement of the jug automatically opens the
non-drip valve and allows remaining coffee to filter through into
the jug.
Once the water tank is empty, we advise you to wait until the
•
brewing process is finished and the filter has run empty before
removing the jug.
You can switch off your appliance anytime simply by pressing the
•
0/1 switch until all pilot lights are off.
USING THE COFFEE GRINDER
Install the fineness knob on the machine. The knob has been
•
adjusted correctly to get the ideal result.
Open the coffee bean container and add the right amount of
•
coffee beans.
5
USK CCG 3 - 071215