Charge Battery - Heiniger Saphir/G Instrucciones De Uso

6.1.2

Charge battery

Fig. 11
Fig. 12
Fig. 13
7. Hold the charger firmly with one hand and pull the clipper (1) or the bat-
tery (2) out with the other.
NOTE!
If the shearer (1) and the reserve battery (2) are both on the charging station
at the same time, the battery in the shearer (1) will be charged up first.
The reserve battery (2) will only charged up when the shearer is charged.
12
1. Test the contacts of the clipper
(1) and the battery (2) for foreign
particles and contamination.
2. Assure, that the switch lever of
the clipper is in OFF-position
("0") (fig. 4).
3. Insert the battery (2) in the clip-
per (3), until the battery interlock
(1) is engaged on both sides.
4. Put the clipper with the inserted
battery (1) or spare battery (2)
from above without force into the
provided charging cavity of the
charging station.
5. Waiting for the battery charging
time (3 specifications).
6. Battery is charging. During the
charging time the control light is
illuminating red (3). As soon as
the battery has been charged to
a min. 90%, the indicator lamp
will change to green and the
charging station switch to "trick-
le charging".
Instruction Manual / Small animal clipper