Fitting The Clipperhead - Heiniger Saphir/G Instrucciones De Uso

6.1.3

Fitting the clipperhead

Fig. 14
Fig. 15
Fig. 16
Fig. 17
NOTE!
For proper operation make sure that the clipperhead (1) is engaged correctly.
Instruction Manual / Small animal clipper
1. If the blade hinge (2) is acci-
dentally closed, lift the latter up
using a screwdriver (1) while si-
multaneously pressing the blade
lock.
2. Fit the clipperhead (1) on the
open blade hinge (2).
3. Fold the clipperhead (2) by light
pressure on to the clipper (1)
which is switched on.
4. Make sure, that the clipperhead
(1) is engaged firmly.
13