Principle Of Operation; Adjustment; Packaging, Transport And Storage - Vega VEGAMET 381 Ex Manual De Instrucciones

•
Approvals
•
Technical data
•
Serial number of the instrument
•
Data matrix code for VEGA Tools app
Serial number
The type label contains the serial number of
the instrument. With it you can find the following
data on our homepage:
•
Product code of the instrument (HTML)
•
Delivery date (HTML)
•
Order-specific instrument features (HTML)
•
Operating instructions at the time of ship-
ment (PDF)
•
Safety instructions and certificates
Go to "www.vega.com", "Instrument search
(serial number)". Enter the serial number.
Alternatively, you can access the data via your
smartphone:
•
Download the "VEGA Tools" app from the
"Apple App Store" or the "Google Play
Store"
•
Scan the Data Matrix code on the type label
of the instrument or
•
Enter the serial number manually in the app
3.2

Principle of operation

Application area
VEGAMET 381 Ex is a universal single signal
conditioning instrument with integrated level
switches and display for continuous sensors.
At the same time, it can serve as power supply
unit for the connected sensor.VEGAMET 381
Ex is designed for connection of any 4 ... 20 mA
sensor. The instrument is suitable for carrier rail,
panel and surface mounting.
Functional principle
The VEGAMET 381 Ex signal conditioning inst-
rument can power connected sensors and pro-
cess their measurement signals. The requested
measured variable is shown on the display and
also outputted to the integrated current output
for further processing. The measurement signal
can thus be transferred to a remote indication or
a superordinate control system. Two level relays
for control of pumps or other devices are also
integrated.
Voltage supply
Wide range power supply unit with
20 ... 253 V AC/DC for worldwide use.
VEGAMET 381 Ex • 4 ... 20 mA signal conditioning instrument
Detailed information about the power supply
can be found in chapter "Technical data".
3.3

Adjustment

The adjustment of VEGAMET 381 Ex is carried
out via the integrated keys and a 16-step func-
tion switch.
3.4 Packaging, transport and
storage
Packaging
Your instrument was protected by packaging
during transport. Its capacity to handle normal
loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists
of environment-friendly, recyclable cardboard.
For special versions, PE foam or PE foil is also
used. Dispose of the packaging material via
specialised recycling companies.
Transport
Transport must be carried out in due conside-
ration of the notes on the transport packaging.
Nonobservance of these instructions can cause
damage to the device.
Transport inspection
The delivery must be checked for completeness
and possible transit damage immediately at re-
ceipt. Ascertained transit damage or concealed
defects must be appropriately dealt with.
Storage
Up to the time of installation, the packages
must be left closed and stored according to the
orientation and storage markings on the outside.
Unless otherwise indicated, the packages must
be stored only under the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
Storage and transport temperature
•
Storage and transport temperature see
chapter "Supplement - Technical data -
Ambient conditions"
•
Relative humidity 20 ... 85 %
3 Product description
23