Publicidad
3
POSITION AND SECURE EYE BOLTS.
Drop two eye bolt assemblies
into the slat cut outs in front of
the spare wheel and one eye bolt
assembly into the slat behind
the spare wheel. Slide them
into place along the channels as
shown. Tighten to 10 Nm.
4
SECURE STRAPS.
Hook straps onto the eye bolts and fasten the free
ends to the cam buckles and ratchet.
Ensure the ring is in the center of the wheel. Tighten
using the ratchet on the 3 way strap. Test that
the wheel is secure by rocking it back and forth,
retighten as necessary. Secure strap loose ends.
Instruction #80-13-032-Rev 2 - Page 3 of 6
Front of Vehicle
Do not over
tighten!
NOTE: Top view shown.
3X
Publicidad
