NuWave Bravo XL 20801 El Manual Del Propietario página 11

INSTRUCTIONS
MENU
1
1. Press ON/OFF.
2. Press MENU. Selected
setting will be flashing.
3. To select from the menu
turn START/PAUSE or
press MENU.
4. Once desired menu is
chosen, press START/
PAUSE to begin cooking.
The cooking time will
be displayed.
• When the Bravo is
finished cooking, End will
be displayed and the unit
will beep three times.
• Turn START/PAUSE to
adjust temperature and
time, if necessary.
• You can adjust the
temperature and time
for any menu option with
a built-in preheat. (See
12 Preprogrammed
Menu chart.)
Notes:
• Some Menu options require
preheating. This step is
preprogrammed into each
Menu option that requires it.
20 20
instructions
Menus with built-in preheat
include "Air Fry", "Bake",
"Pizza", "Frozen", "Toast",
"Broil", "Grill", and "Roast".
• Once preheat temperature
is reached, the Bravo will
beep, 5 will be displayed,
and a 5-minute countdown
will begin.
SEAR: Default — 450F (232C),
5 minutes.
SEAR 1
450F
This is set to default BEFORE
the regular cooking stage.
1. Press ON/OFF.
2. Press SEAR once, 1 will be
displayed.
3. Press START/PAUSE.
SEAR 1 will be displayed,
colon (:) will flash.
• The unit will cook at
450F (232C) for 5 min.
(SEAR 1), cook at
350F (177C) for 15 min.
(default), display End,
and beep three times,
indicating that your
cooking is complete.
Note:
• Regular cooking stage
temperature and time can be
adjusted by turning START/
PAUSE after Step 1.
SEAR 1 2
1. Press ON/OFF.
2. Press SEAR twice. 450F
(232C), TEMP, and SEAR
1 and 2 will be displayed.
3. Press START/PAUSE.
SEAR 1 will be displayed
and colon (:) will flash.
TIME, TOP, and BTM will
be displayed.
• The unit will cook at
450F (232C) for 5 min.
(SEAR 1), cook at 350F
(177C) for 10 min.
(default), and cook again
at 450F (232C) for 5
min. (SEAR 2). SEAR 2
will be displayed, colon
(:) will flash, End will be
displayed, and the unit
will beep three times,
indicating your cooking
is complete.
SEAR 2
450F
Sear 2 will always be the stage
AFTER the regular cooking
stage.
1. Press ON/OFF.
2. Press SEAR three times, 2
will be displayed.
• Press START/PAUSE.
The unit will cook at
350F (177C) for 15
min. (default), cook at
450F (232C) for 5 min.
(SEAR 2), display End,
and beep three times,
indicating your cooking
is complete.
Notes:
• Press SEAR four times to
clear out Sear function.
• Maximum time for all Sear
functions is 30 min. ("00:30").
• Maximum temperature for
all Sear functions is 500F
(260C).
STAGE
350F
2
STG
You can program a maximum
of 5 stages.
1. Press ON/OFF.
2. Press STAGE.
• Press TEMP/TIME. Turn
START/PAUSE to adjust
this stage's cooking
temperature and time.
3. Press STAGE again to
program another stage of
cooking.
• Press TEMP/TIME. Turn
START/PAUSE to adjust
this stage's cooking
temperature and time.
4. Press START/PAUSE to
begin cooking the stages
programmed.
21 21
nuwavenow.com nuwavenow.com