Quickstart; Instructions - NuWave Bravo XL 20801 El Manual Del Propietario

Ocultar thumbs Ver también para Bravo XL 20801:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

QUICKSTART

ON/OFF
Turns the Bravo
ON and OFF. This also stops any cooking function. While
®
cooking press ON/OFF to cancel.
MENU
Choose between the 12 cooking menu options. Turn START/PAUSE to choose
between each.
PREHEAT
Heats to a desired temperature. By default the preheat temperature is set to
350F (177C).
TEMP/TIME
Use start/pause turn clockwise to increase, counterclockwise to decrease.
Allows you to adjust temperature and time before and during the cooking
process. To convert from Fahrenheit to Celsius press SEAR and TEMP/TIME.
Do the same to switch back.
• Days/Hours: To switch the timer to Days and Hours press PROG and
TEMP/TIME, to go back to Hours and Minutes press PROG and TEMP/
TIME again.
• TIME format: You can change the format to display minutes and seconds
(ex 10:59, 10 minutes and 59 seconds). Press and hold TIME for 1
second, if you press it again it will go back to the default setting.
Note: To adjust the default temperature, press and hold START/PAUSE for 1
second and adjust. This will be the new default temperature.
To adjust the default time press TIME then press and hold START/PAUSE for 1
second and adjust. This will be the new default time.
TOP/BTM
Adjusts the temperatures of the top and bottom heating elements. Default is
set to 100/100.
TOAST
Select between 10 levels. Default is Level 5, 425F (218C) for 5 minutes.
Lower the number with the START/PAUSE dial for lighter toast or raise it for
darker toast.
SEAR
Sears your food before the initial cooking process to preserve juices. Default is
450F (232C) for 5 minutes.
PROG
Gives you access to 100 cooking presets and allows you to store an additional
50 of your own. Refer to the Program section.
WRM/FAN
• WRM: Keeps your favorite leftovers warm after cooking. Default
temperature 140F (60C), default time1 hour, up to 3 hours 50F(10C)-200F
(93C).
• FAN: Adjust between 0 and 3 fan speeds.
STAGE
Lets you cook at different temps and times throughout the
PROBE
Use the included Digital Probe for perfect results every time.
LIGHT
Turns the internal light on and off.
Note: Refer to INSTRUCTIONS for detail explanation for each button and
features.
14
14
quickstart
cooking process.

INSTRUCTIONS

Getting Started
1.
Press ON/OFF once to turn
your Bravo on.
/
2.
Press START/PAUSE to
begin cooking at 350F
(177C) for 15 minutes,
which are the default
settings.
• 357F (177C) will
be displayed and a
countdown will begin.
• To adjust cooking
temperature, turn the
START/PAUSE Dial
clockwise to increase,
or counterclockwise to
decrease temperature
in 5F (1C) increments.
Quickly turn the Dial
to adjust in larger
increments.
• Both the cooking
temperature and time
can be adjusted during
cooking by pressing
TEMP/TIME then
turning the START/
PAUSE Dial to adjust
each.
3.
Press START/PAUSE once
during cooking to pause.
4.
Press START/PAUSE a
second time to resume
cooking.
• Remaining cooking time
will be displayed and the
countdown will continue.
Setting the Clock
1.
Press PREHEAT and
TEMP/TIME at the same
time.
2.
Turn the START/PAUSE
to set the clock. When
12:00 is reached, PM will
be displayed. Unplug the
Bravo to cancel the clock.
Displaying Clock During
Cooking:
1.
Press PREHEAT and
TEMP/TIME at the same
time. The display will show
the current time.
• Time can be adjusted by
turning START/PAUSE.
• The clock time will
remain displayed until
START/PAUSE button is
pressed.
WRM/FAN
FAN – Level 3, High (Full)
Speed
1.
Press and hold WRM/FAN
for 1 second. 3 above STG
and FAN will be displayed.
2.
Rotate the START/PAUSE
dial to adjust the fan speed.
3.
To turn the fan off, press
and hold WRM/FAN for 1
second until the icon is no
longer displayed.
15
15
nuwavenow.com
nuwavenow.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bravo xl 20802

Tabla de contenido