Sony HT-CT800 Manual De Instrucciones página 52

Ocultar thumbs Ver también para HT-CT800:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

completed, "DONE" appears in the front
panel display.
System Power Off Function
When you turn off the TV, the system
will turn off automatically.
Set [System Settings] - [HDMI Settings] -
[Standby Linked to TV] on the system to
[On] or [Auto] (page 58). The default
setting is [Auto].
Note
The connected device may not turn off
depending on the status of the device.
System Audio Control
Function
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system.
The volume of the system can be
adjusted using the TV's remote control.
If the TV sound was output from the
speakers of the system the previous
time you watched the TV, the system
will be turned on automatically when
you turn on the TV again.
Operations can also be made by the
TV's menu. For details, refer to the
operating instructions of your TV.
Notes
• Sound is only output from the TV if other
than [TV], [HDMI1], [HDMI2] or [HDMI3]
input is selected when using the Twin
Picture function on the TV. When you
disable the Twin Picture function, the
sound is output from the system.
• The number for the system's volume level
is displayed on the TV screen depending
on the TV. The volume number displayed
on the TV may differ from the number on
the front panel display of the system.
• Depending on the settings of the TV, the
System Audio Control function may not
52
US
be available. For details, refer to the
operating instructions of your TV.
Audio Return Channel
If the system is connected to a TV's
HDMI IN jack compatible with Audio
Return Channel (ARC), you can listen to
TV sound from the speakers of the
system without connecting an optical
digital cable.
On the system, turn [System Settings] -
[HDMI Settings] - [TV Audio Input Mode]
to [Auto] (page 58). The default setting
is [Auto].
Note
If the TV is not compatible with Audio
Return Channel, the optical digital cable
(not supplied) needs to be connected (refer
to the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc player, "PlayStation
connected to the system, the system
and TV are turned on automatically, the
input of the system is switched to the
input for the device played, and sound is
output from the speakers of the system.
Notes
• If [System Settings] - [HDMI Settings] -
[Standby Through] on the system is set to
[On] or [Auto] and the TV sound was
output from the speakers of the TV the
previous time you watched the TV, the
system does not turn on and the sound
and picture are output from the TV even if
device content is played (page 58).
• Depending on the TV, the beginning part
of content being played may not play
correctly.
4," etc.)
®

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido