Side Tank Accessory - GE Profile P4AAKASBRTD Manual Del Propietário

Side Tank Accessory

NOTE: Appearance may vary by model number.
NOTE:
base can be washed by disconnecting the hose and
needed and rinse thoroughly. The rinse water should
drain out the port in the back.
remove any residual soap (see illustration).
DO NOT WASH THE SIDE TANK IN THE
DISHWASHER.
tubes and drain the water from the reservoir.
Tank's base.
4. Make sure drain tube (A) is connected to the black
hanger and installed on the back of Opal.
slide the shorter side of the attachment under the unit, near the front of the unit. The attachment will slide into a slot on
NOTE: Care should be taken to connect the correct tube to the Opal Side Tank. Tube (B) should always be
connected to the Side Tank whether it is installed on the left or right side of the Opal Nugget Ice Maker. It is
Tube B
attached to
the side tank
Cap and
B A
drain tube (B)
from the black
hanger and
connect this
tube to the
Plug drain tube B
into the side tank
here.
Tube B
attached to
the side tank
49-9000022 Rev. 0