Descargar Imprimir esta página

Astralpool MICRO UP Manual De Instalacion Y Uso página 17

Ocultar thumbs Ver también para MICRO UP:

Publicidad

FR
PROBLÉMATIQUES COURANTES
ES
PROBLEMÁTICAS MÁS COMUNES
DE
GEMEINSAME PROBLEME
PO
PROBLEMAS COMUNS
FR LA POMPE NE S'ALLUME PAS
Solution :
1. Contrôlez que le raccordement au réseau électrique est effectué correctement, comme indiqué sur la petite plaque
Signalétique de la pompe.
LA POMPE FONCTIONNE CORRECTEMENT MAIS N'INJECTE PAS DE LIQUIDE DANS L'INSTALLATION.
Solution :
1. Contrôlez le niveau du produit dans le bac.
2. Contrôlez que le filtre d'aspiration n'est pas obstrué.
3. Contrôlez que le clapet d'injection n'est pas obstrué.
FUITES DE LIQUIDE DU CORPS DE LA POMPE
Solution :
1. Contrôlez l'étanchéité et l'état du tube péristaltique.
UK THE PUMP DOES NOT SWITCH ON
Solutions
1. Check that the electrical connection is correctly made.
THE PUMP FUNCTION CORRECTLY BUT NO LIQUID IS INJECTED IN THE PLANT
Solutions
1. Check the product level in the tank.
2. Check the foot filter which could be closed.
3. Check the injection valve is not closed.
CHEMICAL LEAKS FROM THE DOSING HEAD.
Solutions
1. Check the integrity of the peristaltic tube.
ES LA BOMBA NO SE ENCIENDE
Solución
1. Controlar que la conexión a la red eléctrica este efectuada de manera correcta respetando lo indicado sobre la placa
identificativa de la bomba.
LA BOMBA FUNCIONA CORRECTAMENTE PERONO INYECTA LÍQUIDO ENLA INSTALACIÓN
Solución
1. Controlar el nivel del producto en el depósito de acumulación.
2. Controlar que el filtro de aspiración no esté obstruido.
3. Controlar que la válvula de inyección no esté obstruida.
PÉRDIDAS DE LÍQUIDO DESDE EL CUERPO DE LA BOMBA
Solución
1. Controlar la integridad del tubo peristáltico.
NL DE POMP GAAT NIET AAN.
oplossing:
1. Controleer of de verbinding met het elektriciteitsnet correct is uitgevoerd, met inachtneming van de aanduidingen op het
typeplaatje van de pomp.
DE POMP WERKT CORRECT, MAAR INJECTEERT GEEN VLOEISTOF IN HET SYSTEEM
oplossing:
1. Controleer het niveau van het product in de tank
2. Controleer of het aanzuigfilter niet verstopt is.
3. Controleer of de injectieklep niet verstopt is.
VERLIES VAN VLOEISTOF VAN HET POMPLICHAAM
oplossing:
1. Controleer de staat van de peristaltische slang.
Rev 0.2
UK COMMONLY REPORTED PROBLEMS
NL VEEL VOORKOMENDE PROBLEMEN
PROBLEMATICHE PIƯ COMUNI
IT
Cod. 00.009.158
17

Publicidad

loading