Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

this operating ManUal contains
iMportant safety inforMation.
read carefUlly and Understand
all inforMation Before operating
this deVice. saVe this ManUal for
fUtUre Use.
owner/User responsiBility
The owner and/or user must have an understanding of
the man u fac tur er's operating in struc tions and warn ings
be fore using this service jack. Personnel involved in
the use and op er a tion of equip ment shall be careful,
com pe tent, trained, and qual i fied in the safe operation
of the equip ment and its proper use when servicing
motor vehicles and their com po nents. Warning
in for ma tion should be em pha sized and un der stood. If
the operator is not fluent in English, the man u fac tur er's
in struc tions and warn ings shall be read to and dis cussed
with the op er a tor in the op er a tor's native language
by the pur chas er/own er, mak ing sure the op er a tor
com pre hends its con tents.
Owner and/or user must study and maintain for future
ref er ence the manufacturer's instructions. Owner and/or
user is responsible for keeping all warning labels and
instruction manuals legible and intact. Replacement
labels and literature are available from the
manufacturer.
SPECIFICATIONS
Required Air Pressure .................................... 100 psi
Low Height .................................................... 6-1/4"
Raised Height ..................................................... 22"
Length ......................................................... 60-5/8"
Chassis Width ............................................... 7-5/8"
Chassis Width with Swivel Caster Bracket ...... 18-3/8"
Handle Length ............................................. 45-3/4"
Saddle Diameter ............................................ 5-7/8"
Shipping Weight .......................................... 319 Lbs
791-6620 B
• Read, study, undeRstand and follow all instRuctions
befoRe opeRating this device. • inspect the jack befoRe
each use. do not use jack if damaged, alteRed, modified,
in pooR condition, leaking hydRaulic fluid, oR
unstable due to loose oR missing haRdwaRe oR paRts.
make coRRections befoRe using. • lift only on aReas of
the vehicle as specified by the vehicle manufactuReR.
• weaR eye pRotection that meets ansi Z87.1 and
osha standaRds. • do not use jack beyond its Rated
capacity. • this is a lifting device only. immediately
afteR lifting, suppoRt the vehicle with jack stands
capable of sustaining the load befoRe woRking on the
vehicle. • use only on a haRd level suRface fRee fRom
obstRuctions so the jack is fRee to Reposition itself
duRing lifting and loweRing opeRations. • centeR
load on saddle. be suRe setup is stable befoRe woRking
on vehicle. • do not move oR dolly the vehicle while
on the jack. • do not use saddle adapteRs oR saddle
extendeRs between the stock lifting saddle and the
load. • do not use any adapteRs unless appRoved oR
supplied by napa. • always loweR the jack slowly and
caRefully. • failuRe to heed these maRkings may Result
in seRious oR fatal peRsonal injuRy and/oR pRopeRty
damage.
1
Model # 791-6620 B
10 Ton CapaCiTy
professional
air/HydrauliC
serviCe JaCk
WARNING
Revised 04/15/09

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Napa 791-6620 B

  • Página 1 • do not use any adapteRs unless appRoved oR Handle Length ..........45-3/4" supplied by napa. • always loweR the jack slowly and Saddle Diameter ..........5-7/8" caRefully. • failuRe to heed these maRkings may Result in seRious oR fatal peRsonal injuRy and/oR pRopeRty Shipping Weight ..........
  • Página 2: Preventative Maintenance

    ManUal & parts list for 791-6620 B SETUP PLEASE REFER TO THE EXPLODED VIEW DRAWING IN THIS MANUAL IN ORDER TO IDENTIFY PARTS. 1. In order to install the handle assembly item #41 in the handle socket item #36, first align the main handle tube with the largest hole in the handle socket and the lock pin rod with the smaller hole in the handle socket.
  • Página 3 Pump the handle rapidly several times to push oil past ball valves in power unit. 5. Unit still does not operate. Contact an authorized service center from enclosed list. WARRANty Please contact your local NAPA Auto Parts Store for details on warranty. 791-6620 B Revised 04/15/09...
  • Página 4 ManUal & parts list for 791-6620 B RS6620BA Air Motor Assembly RS6620B34 Hydraulic Unit Assembly RS6620B41 Handle Assembly 791-6620 B Revised 04/15/09...
  • Página 5 ManUal & parts list for 791-6620 B Index No. Part No. Description Qty. Index No. Part No. Description Qty. Frame RS550509 Pedal Pin Washer RS660903BL Roller Bearing Set ( incl. 2 (2), 3, 3A, 4,5 ) RS660903A Roller bearings...
  • Página 6: Especificaciones

    • no use ningún adaptadoR al menos que sea apRobado o pRovisto poR Longitud del mango ........45-3/4" napa. • siempRe baje el gato lentamente y con cuidado. Diámetro de la silla ........5-7/8" • haceR caso omiso a estas adveRtencias puede ocasionaR lesiones peRsonales seRias o fatales y/o daños a la...
  • Página 7: Montaje

    ManUal del fUncionaMiento y lista de pieZas para 791-6620 B MONTAJE CONSULTE POR FAVOR EL DIbUJO DE VISTA EN DETALLE EN ESTE MANUAL PARA IDENTIFICAR LAS PARTES. 1. Para poder instalar el conjunto del mango, artículo #57, en el casquillo del mango, artículo #36. Primero alinee el tubo del mango principal con el agujero más grande en el casquillo del mango y el pasador de seguridad con el agujero más pequeño en...
  • Página 8: Diagnóstico De Averías

    5. El equipo aún no funciona. Contacta al Departamento de Garantía y Refacciones mencionado a continuación. GARANtíA Para mayores informes sobre la garantía, comuníquese por favor con su tienda local de partes automotrices NAPA. 791-6620 B Revised 04/15/09...
  • Página 9 Rallonges de selle entRe la selle du cRic et la chaRge. • ne pas utiliseR d’adaptateuRs autRes que ceux appRouvés ou Longueur du manche .........45-3/4 po fouRnis paR napa. • toujouRs abaisseR le cRic lentement Diamètre de la selle ........5-3/4 po et avec pRécaution. • le non-Respect de ces diRectives peut pRovoqueR des dommages matéRiels ou des blessuRes...
  • Página 10: Directives D'utilisation

    ManUel de fonctionneMent et liste de piÈces poUr 791-6620 B INSTALLATION PRIÈRE DE CONSULTER LA VUE ÉCLATÉE DU PRODUIT DANS LE PRÉSENT MANUEL AFIN D’IDENTIFIER LES PIÈCES. 1. Pour installer le manche (pièce no 57) dans le manchon d’assemblage (pièce no 36), aligner la partie tubulaire du manche avec le plus grand orifice du manchon d’assemblage, puis insérer la tige de retenue dans le plus petit orifice du manchon.
  • Página 11: Entretien Préventif

    ManUel de fonctionneMent et liste de piÈces poUr 791-6620 B ENTRETIEN PRÉVENTIF Voici le symbole utilisé pour dans la section ENTRETIEN PRÉVENTIF du présent manuel pour avertir du risque de blessure. Suivre toutes les directives pour éviter des blessures pouvant être graves ou mortelles.

Tabla de contenido