Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

BEFORE USING THIS DEVICE, READ THIS
MANUAL COMPLETELY AND THOROUGHLY,
UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND
MAINTENANCE REQUIREMENTS.
It is the responsibility of the device owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels are lost
or not legible, contact NAPA for replacements. If the operator is not
fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
SPECIFICATIONS
Low Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1/4"
Raised Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 .5"
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61"
Chassis Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3/4"
Chassis Width w/ Swivel Caster Bracket . . . . . . . . . . 18 .375"
Chassis Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 .5"
Handle Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-3/4"
Saddle Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7/8"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 lbs .
791-6620 C
10 TON AIR/HYDRAULIC
• Read, study, understand and follow all instructions
before operating this device. • Inspect the jack
before each use. Do not use jack if damaged, altered,
modified, in poor condition, leaking hydraulic fluid, or
unstable due to loose or missing hardware or parts.
Make corrections before using. • Lift only on areas of
the vehicle as specified by the vehicle manufacturer.
• Wear eye protection that meets ANSI Z87.1 and
OSHA standards. • Do not use jack beyond its rated
capacity. • This is a lifting device only. Immediately after
lifting, support the vehicle with jack stands capable of
sustaining the load before working on the vehicle. •
Use only on a hard level surface free from obstructions
so the jack is free to reposition itself during lifting and
lowering operations. • Center load on saddle. Be sure
setup is stable before working on vehicle. • Do not
move or dolly the vehicle while on the jack. • Do not use
saddle adapters or saddle extenders between the stock
lifting saddle and the load. • Do not use any adapters
unless approved or supplied by NAPA. • Always lower
the jack slowly and carefully. • This product contains
one or more chemicals known to the State of California
to cause cancer and birth defects or other reproductive
harm. Wash hands thoroughly after handling. • Failure
to heed these warnings may result in serious or fatal
personal injury and/or property damage.
1
MODEL # 791-6620 C
SERVICE JACK
WARNING
rev. 03/28/12

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Napa 791-6620 C

  • Página 1 If the manual or product labels are lost the vehicle as specified by the vehicle manufacturer. or not legible, contact NAPA for replacements. If the operator is not • Wear eye protection that meets ANSI Z87.1 and fluent in English, the product and safety instructions shall be read to OSHA standards.
  • Página 2: Warning Information

    If the manual or product labels are lost or not legible, contact NAPA for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
  • Página 3: Preventative Maintenance

    OPERATING MANUAL & PARTS LIST FOR 791-6620 C SETUP PLEASE REFER TO THE EXPLODED VIEW DRAWING IN THIS MANUAL IN ORDER TO IDENTIFY PARTS. In order to install the handle assembly item #58 in the handle socket item #36, first align the main handle tube with the largest `hole in the handle socket and the lock pin rod with the smaller hole in the handle socket.
  • Página 4 . 5 . Unit still does not operate . For a complete list of authorized hydraulic repair centers, please visit www.toolwarrantyrepair.com WARRANTY Please contact your local NAPA Auto Parts Store for details on warranty. 791-6620 C rev. 03/28/12...
  • Página 5 MODEL # 791-6620 C 10 TON AIR/HYDRAULIC SERVICE JACK RS6620B41 Complete Handle Assembly 791-6620 C rev. 03/28/12...
  • Página 6 MODEL # 791-6620 C 10 TON AIR/HYDRAULIC SERVICE JACK RS6620BA Air Motor Assembly RS6620C59 Complete Hydraulic Assembly 791-6620 C rev. 03/28/12...
  • Página 7 MODEL # 791-6620 C 10 TON AIR/HYDRAULIC SERVICE JACK Index No. Part No. Description Qty. Index No. Part No. Description Qty. RS550509 Pedal Pin Frame Washer RS660903BL Front Wheel (incl. #2, 3, 3-1, 4,5) Oil Hydraulic Assembly RS660903A Roller Bearing Set...
  • Página 8: Toneladas Gato Neumático/Hidráulico Para Servicio

    • Use protección para los ojos que cumpla con las normas ANSI Z87.1 y OSHA. • No use no son legibles, comuníquese con NAPA por unos repuestos . Si el operador no domina el idioma inglés, el comprador/propietario o su el gato para elevar pesos superiores a su capacidad.
  • Página 9: Información De Advertencia

    • No mueva ni empuje el vehículo sobre el gato. • No utilice ningún tipo de adaptador ni extensión entre el asiento del gato y la carga. • No use adaptadores a menos que NAPA los haya aprobado o suministrado. • Baje el gato siempre despacio y con cuidado.
  • Página 10: Instrucciones De Ensamblado

    MANUAL DEL FUNCIONAMIENTO Y LISTA DE PIEZAS PARA 791-6620 C INSTRUCCIONES DE ENSAMBLADO CONSULTE POR FAVOR EL DIBUJO DE VISTA EN DETALLE EN ESTE MANUAL PARA IDENTIFICAR LAS PARTES. Para poder instalar el conjunto del mango, artículo #40, en el casquillo del mango, artículo #35. Primero alinee el tubo del mango principal con el agujero más grande en el casquillo del mango y el pasador de seguridad con el agujero más pequeño en el casquillo del mango.
  • Página 11: Diagnóstico De Averías

    5 . El equipo aún no funciona . Para una lista completa de centros de reparación hidráulica, visite por favor www .toolwarrantyrepair .com . GARANTÍA Comuníquese por favor con su tienda local de autopartes NAPA por los detalles de garantía. 791-6620 C rev. 03/28/12...
  • Página 12 Largeur du châssis . . . . . . . . . . . . . . . . . . . . . . . . . . .7 .756 po fournis par NAPA. • Abaissez toujours le vérin de levage Largeur du châssis avec...
  • Página 13 • Ne pas utiliser d’adaptateurs de selle ou des extenseurs de selle entre la selle de levage et la charge. • Ne pas utiliser d’adaptateurs sauf s’ils sont approuvés ou fournis par NAPA. • Abaissez toujours le vérin de levage lentement et prudemment.
  • Página 14: Directives D'utilisation

    MANUEL DE FONCTIONNEMENT ET LISTE DE PIÈCES POUR 791-6620 C INSTRUCTIONS D'ASSEMBLAGE VEUILLEZ CONSULTER LA VUE ÉCLATÉE POUR IDENTIFIER LES PIÈCES. Afin d’installer l’assemblage de la manche (#40) dans la prise de la manche (#35), il faut d’abord aligner le tube principal de la manche avec le plus grand trou de la prise de la manche et la tige de la broche de verrouillage avec le plus petit trou de la prise de manche.
  • Página 15: Entretien Préventif

    IMPORTANT: Pour prévenir les dommages aux joints d’étanchéité et la défectuosité du cric, ne jamais utiliser d’alcool, de liquide à freins hydrauliques ni d’huile à transmission dans le cric. Utiliser l’huile hydraulique NAPA conçue pour les crics nº 765-1541. Il incombe au propriétaire du cric de garder propres et lisibles les étiquettes du cric. Laver les surfaces externes du cric à l'aide| d'un savon doux, tout en évitant les pièces hydrauliques mobiles.

Tabla de contenido