Lenco CR-620 Manual De Usuario página 17

20. Trouble Shooting
Problem: FM Hiss/DAB burbling/intermittent cut-out/DAB No stations available
message
Cause: Low signal strength
Solution: Check/move antenna. Move radio. Rescan local (high-strength)
21. Error messages
'Service not available':
'Signal error':
'No DAB Station':
'No stations found':
'No Radio Text':
'No PTY':
'No Name':
22. Specifications
Description:
Speaker
Frequency Range:
LCD Display:
Power Supply (Power adapter):
Dimensions:
Working Temperature:
Manufacturer name of power adaptor:
Model number of power adaptor:
No DAB reception
The DAB signal has been interrupted.
The listed station cannot be found.
(No name.):
The current station does not broadcast an identity name.
No DAB stations are available, check aerial.
No RDS text information is available on this station.
No RDS programme type information is available.
No RDS station name is being broadcast.
DAB+/FM Digital Radio
1 x 1W rms
FM: 87.5-108MHz
DAB/DAB+: Band III 174.928-239.200MHz
2.8 inches color TFT display
Input: 100-240V ~ 50/60Hz 0.3A max
Output: 5V 1000mA
98mm x 110mm x 90mm
0-45°C
DongGuan Obelieve Electronic Co., Ltd
OBL-0501000E
17