5. Setting the temperature or humidity:
With
you can switch between the setting and display of temperature or
humidity.
Press the button
temperature can be adjusted from 2-14 ° C in 1 ° C steps.
Press the button
the humidity can be adjusted from 50-85% in 1% steps.
If you do not change the setting within 3 seconds, than the device will return to its
previous setting.
The device automatically returns to the temperature display.
► Only hang / place the meat in the DryAger when the device has reached the desired
temperature.
► Tip: For ideal maturity results we recommend the following setting: temperature 3°C / air
humidity 75%.
► Tip: You can switch between the temperature display in ° C and ° F by pressing the
and
6. LED light and UV light setting
Press 1 x
hours.
Press
for 5 seconds, the UV light will turn on.
► The door has a safety switch. When you open the door of the device, the UV light
switches off automatically. When you close the door, the UV light will turn on again.
► The UV light is used to disinfect the interior before, during and after the aging process.
once, then the temperature flashes on the display and the
twice, then the humidity indicator is shown on the display and
Please note
buttons simultaneously for 3 seconds.
, to switch on the LED light, this switches off automatically after 4
Please note
41