Indoor Unit - mabe MMT09CDBSCCJ8 Manual Del Propietário

indoor unit

1. Fitting of the mounting plate and positioning of the wall
hole.
When the mounting plate is first fixed
1. Carry out based on the neighboring pillars or lintels, a proper lev-
eling for the plate to be fixed against the wall, then temporarily
fasten the plate with one steel nail.
2. Check again the proper level of the plate by hanging a thread
with a weight from the central top of the plate, then fasten se-
curely the plate with the attachment steel nail.
3. Find the wall hole location "A" using a measuring tape.
For 9 000 BTU/h systems
For 12 000 BTU/h systems
For 18 000 BTU/h systems
For 24 000 BTU/h systems
21 mm
A = 45 mm B = 60 mm Ø
20 mm
A = 41 mm
B = 60 mm Ø
B = 60 mm Ø
30 mm
A = 120 mm
B = 60 mm Ø
30 mm
A = 113 mm
77