Specifications - Sony CPD-L181A Manual De Instrucciones

Additional Information

Specifications

LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 18.1 inches (46 cm)
Input signal format RGB operating frequency*
fh: 30 – 92 kHz
fv: 48 – 85 Hz
Pixel efficiency 99.99 %
Resolution H: max. 1280 dots
V: max. 1024 lines
Power requirements Input:
Power consumption Monitor only: 3.0 A
Including the AC adapter: 0.7 A
AC adapter Type: AC-L181A
Input rating:
Output rating: DC 20 V, 5 A
Dimensions (w/h/d) Including the stand:
Monitor only:
Mass Approx. 9 kg (19 lb 14 oz)
Plug & Play DDC/DDC2B/DDC2Bi
Supplied accessories See page 6.
* Recommended horizontal and vertical timing
conditions
Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec., whichever is larger.
Horizontal blanking width should be more than 2.5 µsec.
Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without
notice.
20
DC 20 V (using the AC adapter)
AC 100 – 240 V, 50 – 60 Hz
Max 1.2 A
Approx. 468 × 422 × 207.5 mm
× 16 × 8
1 5 1
(18 / / / in.)
2 8 4
Approx. 468 × 354.5 × 95 mm
× 14 × 3
1 3
(18 / / in.)
2 4
including the stand
...1/...2 pin assignment
5 4 3 2 1
10 9
15 14 13
Pin No. Signal
1 Red
2 Green
(Composite Sync
on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
* Display Data Channel (DDC) Standard of VESA
8 7 6
12 11
Pin No. Signal
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional
Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*