Britax ENDEAVOURS B-SAFE ULTRA Guia Del Usuario página 10

Britax Child Safety, Inc.
Lap-Shoulder Belt Installation
1. Place the base on the
vehicle seat and then pass
the vehicle belt through the
belt route.
2. Ensure that the vehicle
seat belt is not twisted and
buckle.
3. Press the base firmly into
the vehicle seat while
removing all slack from
first the lap portion and
then the shoulder portion
of the vehicle seat belt.
14
ENDEAVOURS/B-SAFE ULTRA User Guide
4. Hold the vehicle shoulder
belt tightly and slide firmly
under the lock-off on the
side of the base opposite
the buckle.
Base Installation with Lap-Shoulder Belt
CHECKLIST
ü Check that the vehicle belt is tight and that the base
is secure. The base is secure when it moves less
than 1 inch (2.5 cm) front-to-back or side-to-side at
the vehicle belt path.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
15