Auto Return - Mitsubishi Electric CITY MULTI PAR-CT01MAU-SB Manual De Instrucciones

3
4
Timer or preset temperature settings will not be effective when the temperature range is
restricted, when the HOLD function is enabled, and when the system is centrally
controlled (when the temperature range setting from local controller is prohibited). When
the system is centrally controlled (when timer operation from local remote controller is
prohibited), only the timer setting will be ineffective.
The screen to make the settings for the automatic
return to the preset temperature will appear.
Move the cursor to the desired item with the
button out of "Auto return," "Cool," or "Heat."
Change the settings with the
•
Auto return: No (disable)/Yes (enable)
•
Cool: Timer setting range is 30 to 120 minutes in
10-minute increments.
Temperature setting range is 19 to 30ºC (67 to 87ºF)
(1ºC increments).
•
Heat: Timer setting range is 30 to 120 minutes in
10-minute increments.
Temperature setting range is 17 to 28ºC
(63 to 83ºF) (1ºC increments).
Press the button to save the settings. "Cool"
SELECT
includes "Drying" and "Auto Cool" modes, and "Heat"
includes "Auto Heat" mode.
The screen to set the selected item will appear.
Navigating through the screens
To go back to the Main menu ..........
To return to the previous screen ......
F1 or
F3 or F4 button.
MENU button
RETURN button
F2
49