Publicidad
1
A
2
B
3
a
b
4
Caution:
Always make sure that the machine is unplugged from power source
and the main switch is on "O". when the machine is not in use and
before inserting or removing parts.
Attention:
Consult a qualified electrician if in doubt as to connect machine to
power source. Unplug power cord when machine is not in use.
The appliance must be used with the foot controller 4C-316B (110-
120V area)/ 4C-126G or 4C-326G (230V area)/ 4C-316C or 4C-326C
(220-240V area) manufactured by MATSUSHITA ELECTRIC
(TAIWAN) CO., LTD.
10
Publicidad
