Samsung NX58 565 Serie Manual Del Usuario página 66

Maintaining your appliance
Cooktop surface
The cooktop surface is a porcelain-enamel surface. To prevent this surface from
becoming dull, wipe up and clean spills as they happen. Foods with a lot of acid
(tomatoes, sauerkraut, fruit juices, etc.) or foods with high sugar content can cause
dull spots if allowed to set.
WARNING
Do not use a steel-wool pad or abrasive cleaners on porcelain-enamel surfaces.
Abrasive pads and cleaners will scratch and damage the surface.
66 English
1. Make sure all surface burners are OFF.
2. When surfaces have cooled, remove the
burner grates.
WARNING
Do not remove or lift the cooktop during
cleaning. Doing so could damage the
gas lines leading to the surface burner
manifolds, causing poor and/or dangerous
operation.
3. Clean the cooktop surface with warm,
soapy water and a soft, damp cloth.
If spill goes under a surface burner,
remove the surface burner cap and head
to access and clean the spill.
4. Rinse with clean water and dry and
polish with a soft, dry cloth.
5. Reassemble burner components (if
removed) and replace the burner grates.