Using The Gliding Rack (Nx58*565*** Only) - Samsung NX58 565 Serie Manual Del Usuario

Operating the oven
To remove an oven rack:
To replace an oven rack:
36 English
1. Pull the rack straight out until it stops.
2. Lift the front of the oven rack, and then
pull to remove it from the oven.
1. Place the back edge of the rack on the
desired rack supports.
2. Lift the front of the rack, and then slide
it into the oven.

Using the gliding rack (NX58*565*** Only)

The fully extendable Gliding Rack makes food preparation easier, especially when
preparing heavier dishes. The Gliding Rack has 2 glide tracks that allow you to
extend the rack with food on it out of the oven for easier access and removal.
Installing the Gliding rack
Rack
Guides
Removing the Gliding rack
• With the Gliding rack in the "Closed"
position and the oven off, carefully
insert the Gliding Rack between the
guides until the rack reaches the back.
• When using the Gliding Rack in the
oven, be sure to pull on the handle of
the rack only to slide it in and out. If you
grasp the frame while using the rack,
you can pull the entire Gliding Rack out
of the oven.
• With the Sliding rack in the "Closed"
position and the oven off and cool,
grasp the rack and frame and pull both
towards you to remove.