General Specifications; Electrical Specifications; General Safety Information - World Dryer XRA Serie Manual Del Usario

Description
World Dryer recess mounted, ADA compliant warm air hand dryer, powered by a high speed universal motor, delivering 2300 Watts
of drying power. This hand dryer runs on 115 Volts AC, 208/220-240 Volts AC, or 277 volts AC electrical supply, depending on
model. Automatic and push-button models are represented in this product group. This appliance is intended for use in hand drying,
contributing to hygienic and cost effective hand sanitation. This hand dryer may be used in commercial, industrial, office and public
facility environments.

General Specifications

Basic Models Nozzle
DXRA Fixed
XRA Fixed
RA Fixed*
(*) Rotating Nozzle Option

Electrical Specifications

Models Type
(D) XRA5 Automatic
RA5 Push-button
(D) XRA54 Automatic
RA54 Push-button
(D) XRA548 Automatic
RA548 Push-button
(D) XRA57 Automatic
RA57 Push-button
(cULus Listed, E19860, CE TUV-GS)

General Safety Information

DANGER
• Always disconnect the power source before servicing or installing the hand dryer.
DANGER
• This hand dryer must be properly grounded (Earthed) for safe operation. An identified ground connection point is supplied on the
hand dryer's wall base.
• We recommend GFCI protection in wet or damp locations or as required by local code.
WARNING
• Use only the electrical power (voltage and frequency) specified for the model hand dryer being installed.
• Connect the hand dryer to the nearest suitable distribution panel.
• To limit a voltage drop, and insure efficient operation, use wire gauge as required by local or National Electrical Code.
• Do not connect to a branch circuit with CB or fuse protection over 20 Amps. This is in compliance with The National Electrical Code.
• All automatic model hand dryers must have a dedicated 20 Amp circuit as required by Underwriters Laboratories, Inc. (UL).
• Route all field wiring away from any moving parts within the hand dryer.
CAUTION
Unpacking
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. If the
hand dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Drying Cycle Dimensions (WxDxH)
Automatic 13.1" x 13.8" x 4"
Automatic 13.1" x 13.8" x 4"
30 Seconds 13.1" x 13.8" x 4"
Electrical Input
115 VAC, 60 Hz
115 VAC, 60 Hz
208-230 VAC, 60 Hz
208-230 VAC, 60 Hz
220-240 VAC, 50 Hz
220-240 VAC, 50 Hz
277 VAC, 60 Hz
277 VAC, 60 Hz
Failure to disconnect the power source before installation or servicing can
result in serious injury or death from electric shock.
Failure to properly ground this unit could result in severe electrical shock
and/or death.
Risk of fire, personal injury or property damage are possible if local codes,
NEC codes or safety recommendations are not followed.
Improper mounting could result in personal injury or property damage.
333 mm x 351 mm x 102 mm
333 mm x 351 mm x 102 mm
333 mm x 351 mm x 102 mm
Amperage
20
20
10
10
10
10
8.5
8.5
2
Weight Cover Material
26.5 lbs / 12 kgs Stainless Steel
35 lbs / 15.9 kgs Cast Iron
35 lbs / 15.9 kgs Cast Iron
Watts
2300
2300
2300
2300
2300
2300
2300
2300