Setting The Alarm Time; Switching Off The Alarm - Hama Wecker A400 Instrucciones De Uso

4. Startup and Operation
4.1. Starting up the clock
• Open the battery compartment, insert
one AA battery, ensuring that the
battery is inserted correctly in terms
of polarity, and then close the battery
compartment. The clock is ready for
operation.
4.2. Setting the time
• Turn the time set wheel in an anti-
clockwise direction to set the hour and
minute hands to the correct time.

4.3. Setting the alarm time

• Turn the setting wheel for the alarm
time in an anti-clockwise direction
to set the hands for the alarm to the
appropriate time. Set the ON / OFF
switch to the ON position to activate
the alarm time.

4.4 Switching off the alarm

• Set the ON / OFF switch to the OFF
position to switch off the alarm.
5. Care and Maintenance
Only clean this product with a slightly
moist, lint-free cloth, and do not use
aggressive cleaning agents. Make sure
that water does not get into the product.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability
and provides no warranty for damage
resulting from improper installation/
mounting, improper use of the product
or from failure to observe the operating
instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting
if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/
English)
Further support information can be
found here:
www.hama.com
8. Technical Data
Power supply
A400
travel alarm clock
1.5 V
1 x AA battery
3