Safety System; Introduction; Black Out" Alarm; Fume Probe" Alarm - Cadel NICE Manual De Instalación, Uso Y Manutención

11

SAFETY SYSTEM

11.1

INTRODUCTION

Safety devices are used to prevent and avoid the risk of damages to people, animales and objects.
It is forbidden to execute repearing by no authorized personnel otherwise the warranty and the manufacturer
liability fall.
Before of every intervention leave the fire completely extinguish till the cooling and
always disconnect the plug from the electric socket.
11.2

"BLACK OUT" ALARM

"ACTIVE ALARM" "AL 1 - BLACK OUT": current breaking during ignition.
• Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and then is in "OFF":
• Clean the burning pot and start the stove up again with P4 key.
11.3

"FUME PROBE" ALARM

To the exhaust is connected a probe which contantly controls the temperature during working time.
"ACTIVE ALARM" "AL 2 - FUME PROBE": the probe is damaged or disconnected.
• Reset the error with P4 key. The stove carries out the phase "FINAL CLEANING" and the is in "OFF".
• Check the type of glitch as ALARMS page 79.
• Clean the burning pot and start the stove up again with P4 key.
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
Fig. 25 - Remote control
LEGEND Fig. 25 page 71
Button 1
Increase the desired temperature
Button 2
Decrease the desired temperature
Button 5
Decrease the power level from 1 to 5
Button 6
Increase the power level from 1 to 5
Buttons 1
Pressed together enable to turn the stove on and off
and 6
EN
71